best365|中国品牌公司|唯一官网

Detailed explanation of the functions of Hirays Technology capacitor air tightness detector

For tiny products such as capacitors and relays, airtight leak detection is a difficult point.On the one hand, many products are sealed as a whole, with uncertain shapes and small internal spaces, which increases the difficulty of detection.On the other hand, the product production cycle is fast, and it is not easy to achieve efficient air tightness testing.Therefore, our manufacturer hopes to have a detector that can break through these detection difficulties. Therefore, as a well-known domestic expert in the development and production of air tightness detectors, Hirays Technology has developed a capacitor air tightness detector based on the characteristics of capacitors.

Hirays Technology Capacitor Air Tightness Tester Product Display Picture

In order to solve the problem of air tightness testing caused by the appearance of capacitors, Hirays Technology divides the capacitor air tightness detector into three parts: tester, air source, and tooling.The tooling is a mobile part in air tightness testing. We can replace the tooling to detect different types of capacitors.This makes our detector not limited by the size and shape of the capacitor, broadening the detection range of the detector.

In order to cope with the fast pace of capacitor production, we need to improve the efficiency of air tightness testing. Hirays Technology combines manual testing with automated testing.The following is the operation process of the two detection modes of the Hirays capacitor air tightness detector.

Hirays Technology Electrical Air Tightness Tester Operation Interface

(1) Manual inspection: Put in the workpiece; press it; block it; block the sump; motor rises; start the air tightness leak detection instrument; test is completed; motor shuts off; motor drops; sump retracts; block retracts; relax; take out the workpiece.

（2）Automatic detection: Set the operating knob to "Auto"; press the start button with both hands; the clamp starts to work (the cylinder is pressed down; the side cylinder and lower cylinder are blocked in place; the rear cylinder is blocked in place); the instrument starts→Automatic testing→After passing the mark, the marking head will automatically reach the standard, the pass indicator light will light up, and the cylinder will reset (when it fails, the unqualified indicator light will turn on, and the cylinder can be reset by pressing the reset button).

However, these two modes alone cannot meet the efficiency of capacitor air tightness detection, so Hirays Technologyequip it with“Positive, negative”Two forms of pressure, and8There are three basic test modes, which can be selected individually or combined.It can support leakage test, obstruction test, positive pressure test, negative pressure test and other sealing test methods.use24BitA/Dconversion,32BitCPUComputing, and completely independently developed industrial control operating system, with full touch human-computer interaction interface.built-inRS232serial port,RJ45network port,USBcommunication interface,LTPexternalI/OThe control port supports multiple communication protocols, which enhances the operability of the equipment, saves manpower and material resources in testing, and improves the manufacturer’s testing efficiency.

This capacitor air tightness tester from Hirays has a detection pressure range of-80kpa~1000kpa, with different tooling, it fully meets the capacitor full line testing standards, the fastestThe test result is displayed in 3 seconds to meet the demand for efficient testing and has been used by many manufacturers.

The above content is originally created by Hai Ruisi Technology, and unauthorized reproduction and plagiarism are prohibited.